WW versions shown, 10.0 mm versions look similar. Left: 3/4" pot chuck, P/N 2100 or 2103, middle: 1" pot chuck P/N 2101 or 2104, right: 1-1/4" pot chuck P/N 2102 or 2105. Each includes a 1/8" pin that is closed on while the collet is turned to size on the lathe. (Click on photo for larger image.)
| P/N | NAME | WT. | PRICE |
| 2100 | 3/4" WW collet pot chuck | .05 lb. | $25.00 |
| 2101 | 1' WW collet pot chuck | .05 lb. | $27.00 |
| 2102 | 1-1/4" WW collet pot chuck | .05 lb. | $30.00 |
| 2103 | 3/4" 10.0 mm collet pot chuck | .15 lb. | $35.00 |
| 2104 | 1" 10.0 mm collet pot chuck | .15 lb. | $40.00 |
| 2105 | 1-1/4" 10.0 mm collet pot chuck | .15 lb. | $45.00 |
These collets can be easily machined and are especially designed to hold larger and odd shaped parts. A 1/8" (3.17mm) dowel pin is included with the collet to close on while the face is being machined. The face is drilled 3/16" deep or less and then bored to exact size to make what is, in effect, a custom chuck for parts too big to be held in regular WW collets. They are used with WW collet adapter and drawbar (P/N 1161).
NOTE: Collet pot chucks are designed to hold material only on the face end, not through the collet. Maximum gripping depth is 3/16" (4.8mm).
Sherline also makes a WW collet with a 1" blank that is deeper than the pot chucks and is not split. It can also be modified to hold tools or parts for special tasks. See P/N 2083.
READ INSTRUCTIONS FOR USING COLLET POT CHUCKS (Click on your choice.)
.html Version (Web site version)
.pdf Version (The same as our printed instructions. Requires Adobe Acrobat program to view.)
RETURN TO ACCESSORIES MASTER LIST
Shop for Sherline LATHES
Shop for Sherline MILLING MACHINES
Shop for Sherline CHUCKS
RETURN TO SHERLINE'S HOME PAGE
| Home
Page | About
Sherline | Frequently
Asked Questions | Testimonials
| Lathes
|
| Mills
| Accessories
| Dealers
| Tool
Prices | Accessory
Prices |
| Contest
| Full
Size Tools | SHERLINE
Weight Scales | Race
Car Alignment System |
| IMMA
| Resources
| SHERLINE
People |