Sherline lathes and mills can be ordered with a compliment of selected tools. This helps you select the most popular accessories to go with your new machine and saves you money at the same time. Shown below are the accessory packages that can be ordered with any machine, whether it be manual, DRO or CNC. Click on any of the photos to enlarge for more detail. 4000-series lathes have standard handwheels and a plain tool post while 4400-series lathes feature adjustable zero handwheels and a rocker tool post. See the Machines and Packages Price List for prices.

LATHE PACKAGES

Standard equipment with all lathes includes a faceplate, drive dog, 2 Tommy bars, #1 and #0 Morse dead centers and two hex adjustment keys. The 4000-series lathes have a 3.5″ swing and 8″ between centers. The 4400-series lathes have a 3.5″ swing and 17″ between centers.

4400a_pic
4400A Shown
“A” Package

The “A” package Includes two chucks: a 3-jaw chuck and a drill chuck with drawbolt and key. 4000-series lathes include a 2.5″ 3-jaw chuck and a 1/4″ drill chuck. 4400-series lathes include a 3.1″ 3-jaw chuck and a 3/8″ drill chuck. Both packages include #1 and #0 chuck arbors and a drawbolt with centering washer.

4400b_pic
4400B Shown
“B” Package

In addition to the chucks in the 4000- or 4400-series “A” package, the “B” package includes the most popular lathe accessories. Shown above are:

  • 1074 Steady Rest
  • 1191 Live Center
  • 3002 Cutoff Tool and Holder
  • 3007 3-piece 1/4″ HSS Cutting Tool Set (LH, RH and Boring tools)
  • 3020 5/32″ Sherline Hex T-driver
  • 3021 3-piece Center Drill Set
  • 5327 Sherline Accessories Shop Guide book (Softound, 8.5 x 11″ 224 pages, black and white)
4400c_pic
4400C Shown
“C” Package

In addition to the chucks in the 4000- or 4400-series “A” package, and the accessories in the “B” package, the “C” package includes two more popular accessories. Included with the 4000-series or 4400-series lathe and “C” package are:

  • 1270 Compound Slide
  • 3100 Threading Attachment

MILLING MACHINE PACKAGES

Standard equipment included with each 5000-, 5400-, 2000-series, or 5800-series mill consists of a Tommy bar and three hex adjustment keys. The 5400-series deluxe mills also include a 1/4″ drill chuck and a headstock spacer block plus adjustable zero handwheels and laser engraved reference scales on the base and table. The 2000-series mills include the same standard equipment as the 5400-series mills except that the headstock spacer block is not included, as it is not necessary due to the adjustment capabilities of the 2000 mill. The 5800-series NexGen Mill Features an Extra-Rigid Column Base, a 15″ Extended Column Bed, an 18″ Extended Mill Table and an 18″ Mill Base, 7″ x 13″ Tooling Plate (3 T-slots, Alignment Pins), Y-axis covers—Mill Accordion Way Cover Set and extended 12″ brass rear leadscrew cover.

5000-series mills have a 10″ base with 3″ of Y-axis travel, 5400-series mills have a 12″ base with 5″ of Y-axis travel, 2000-series mills have a 14″ base with 7″ of Y-axis travel, and 5800-series mills have a 18″ base with 9″ of Y-axis travel.

5400a_pic
5400A Shown
“A” Package

Only an “A” package is offered as an option for Sherline mills, but it includes a good selection of the most needed accessories. Included are:

  • 1072 1/4″ drill chuck with key, #1 Morse arbor and drawbolt
  • 3013 Step Block Hold-down Set
  • 3020 5/32″ Sherline Hex T-driver
  • 3021 3-piece Center Drill Set
  • 3052 Fly Cutter with 1/4″ carbide cutting tool
  • 3060 3-piece Mill Collet Set with Drawbolt
  • 3079 3/8″ End Mill Holder
  • 3551 Milling Vise
  • 5327 Sherline Accessories Shop Guide book (Softound, 8.5 x 11″ 224 pages, black and white)

See the Machine Tools and Packages Price List for prices.

COMPLETE MACHINE SHOP PACKAGES

Included with each shop package is a 4400 deluxe lathe and your choice of either a 5400-series deluxe mill, a 2000-series deluxe 8-direction mill, or the 5800-series NexGen mill. In addition to the two machines, the following accessories are included:

6000_pic
6000 Package—5400 MIll and 4400 Lathe Shown

 

6200_pic
6200 Package—2000 MIll and 4400 Lathe Shown
6280_pic
6280 Package—5800 MIll and 4400 Lathe Shown
LATHE ACCESSORIES
  • 1040 3.1″ 3-jaw Self-centering Chuck
  • 1069 3/8″ Tailstock Chuck and Key plus #1 and #0 chuck arbors and key
  • 1074 Steady Rest
  • 1191 Live Center
  • 3002 Cutoff Tool and Holder
  • 3007 3-piece 1/8″ HSS Cutting Tool Set (LH, RH and Boring tools)
MILL ACCESSORIES
  • 1297 Headstock Spacer Block (not needed or included with 8020mill package)
  • 3013 Step Block Holddown Set
  • 3052 Fly Cutter
  • 3054 Boring Head (inch) or 3049 metric boring head with metric orders)
  • 3060 3-piece mill collet set with drawbolt
  • 3063 Boring Tool (5/16″ x 1″ maximum depth
  • 3073 1/4″ Drill Chuck with #1 Morse Arbor, Drawbolt and washer
  • 3079 3/8″ End Mill Holder
  • 3551 Milling Vise
  • 3700 4″ Manual Rotary Table
  • 3750 Tilting Angle Table
  • 7400 6-piece, 3/8″ shank, double-ended End Mill Set
OTHER ACCESSORIES
  • 3020 Sherline 5/32″ Hex T-driver
  • 3021 3-piece Center Drill Set
  • 5327 Sherline Accessories Shop Guide book (Softound, 8.5 x 11″ 224 pages, black and white)
  • 5330 Safety Glasses

See the Complete Machine Shop and Packages Price List for prices.