Accessories for the Laser Marking and Scanning Industries

Sherline offers a 4″ rotary table and industrial slides that are popular in the laser marking and scanning industries. Also offered are round and rectangular tooling plates that are specifically designed to mount parts on top of the tables for scanning or marking. Click on any of the links below to learn more about these products.

6540laz_pic_270x130
Click on the image to enter this category.
X/Y Bases and Laser Engraving Plate

The Laser Tooling Plate can be mounted to your own fixture, or it can be purchased along with a Sherline XY base with an 18″ table. The XY base is shown in manual configuration, but it is also available with NEMA 23 stepper motor mounts for CNC operation (mounts to any Sherline mill or industrial slide table).

3726-27-28laz_pic_270x130
Click on the image to enter this category.
3D Laser Scanning Plates for Rotary Table

All three plates are shown here in one photo. They come in sizes 8″, 10″, and 12″ in diameter. All are designed to be used on the Sherline 4″ Rotary Table.

Click on the image to enter this category.
Rotary Scanner Riser Block and Base

This large 10″ x 10″ base is 1/2″ thick and stabilizes the Sherline 4″ rotary table when it is used with a scanning plate to hold large or heavy objects for laser scanning. The large base offers substantial support to keep the table from tipping if the scanned object is not perfectly centered.

NOTE: The rotary table is not included, shown for reference only.

Click on the image to enter this category.
Tilting Angle Tables for Laser Marking

Other laser accessories include specialized tilting angle tables and a step block hold-down set.

1140_pin_jaws_chuck_pic_270x130
Click on the image to enter this category.
3-Jaw Chuck “Pin Jaws”

We designed our Pin Jaws specifically for laser engraving rings and other similar parts. These jaws are not designed for machining parts or other uses that require more than finger tight closing pressure to hold the part in the chuck (chuck not included).

Options include:

  • Standard jaws with 1/8″ diameter steel dowel pins
  • Short jaws with 3/16″ diameter steel dowel pins
  • Extended jaws with 3/16″ steel dowel pins
Click on the image to enter this category.
4″ Rotary Tables

Sherline offers 4″ CNC rotary tables that are popular in the laser marking and scanning industries.

Options include:

  • Manual and CNC-ready rotary tables
  • CNC Rotary table w/stepper motor (P/N 8730)
  • CNC Rotary table w/stepper motor and rotary indexer (P/N 8700)
  • Nickel/Teflon coating
  • …and more