Model 4500/4530 Lathe

with adjustable "zero" handwheels

(Click on photo for larger image)
Note that a Model 4000 lathe is shown here. The only difference is the standard handwheels vs. the adjustable "zero" handwheels that come on the 4500

The model 4500 (4530) lathe is a standard model 4000 (4100) 3.5” x 8” lathe upgraded to include two adjustable “zero” handwheels on the crosslide and leadscrew. (Standard handwheel on tailstock.) The lathe includes the motor and its speed controller, a 2.75" (70mm) x 6.0" (152mm) crosslide, 15" (381mm) steel bed to allow 8" (203mm) between centers, pulleys, belt, faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened high-speed steel cutting tool, eight-foot, three-wire power cord and instruction booklet. This lathe can turn a part up to 3.5” in diameter over the bed or up to 1.88” over the carriage without riser blocks. With an optional riser block, parts up to 6” in diameter can be turned over the bed. The lathe has 8” of space between centers. The electronic speed control allows continuously variable speed control from 70 to 2800 RPM without belt changes. There is a second pulley position available that offers extra torque at low RPM if needed.

Adjustable zero handwheels allow the user to reset the handwheel to a zero reading at any time without moving the leadscrew. This makes dialing in the next dimension easier, as you are starting from zero each time. It also helps eliminate math errors. This is a feature normally found on expensive full-size machines, but not often available on a machine of this size and price.

READ INSTRUCTIONS FOR SETTING UP A LATHE OR MILL

READ INSTRUCTIONS FOR USING A LATHE

Save money with package deals

Lathes can now be purchased packaged with chucks and other preselected groups of accessories. See the page on PACKAGE DEALS. Save time and money by buying a package.

RETURN TO LATHES PAGE

VIEW MILLS PAGE

RETURN TO SHERLINE'S HOME PAGE

| Home Page | About Sherline | Frequently Asked Questions | Testimonials | Lathes |
| Mills | Accessories | Dealers | Tool Prices | Accessory Prices |
| Contest | Full Size Tools | SHERLINE Weight Scales | Race Car Alignment System |
| IMMA | Resources | SHERLINE People |

Copyright 2008, Sherline Products Inc. All rights reserved.
No part of this web site, including the text, photos or illustrations, may be reproduced or transmitted in any form or by any means (electronic, photocopying, recording or otherwise) for commercial use without the prior written permission of Sherline Products Inc.