Product Description
The P/N 3073 3/8″ chuck includes a #1 Morse arbor and drawbolt so that it can be mounted in the headstock of the lathe or mill. P/N 3073 has the same size capacity as the P/N 1069 chuck, which is 3/32″ to 3/8″ drill sizes. If runout of less than .003″ amount is required, collets should be used to hold the drill rather than a chuck.
NOTE: Because of its longer length and ability to hold longer 3/8″ drills, this chuck is normally recommended for use on the longer 4400-series benchtop lathes.
