This listing offers a logical way to locate the part number of a particular accessory. The list is divided into five sections: Lathes, Vertical Milling Machines, Accessories for both Lathe and Mill, Accessories for Clockmakers, and Books and Videos. The accessories are arranged under each machine in groups by where or how they are used on the machine. For example, to find the indexing attachment, you would look in the “Vertical Milling Machines” section under the “Work-Holding Devices” subsection. To find the knurling attachment, you would look in the “Lathes” section under the “Crosslide Accessories”sub-section. To find center drills, you would look under “Accessories for Both Lathe and Mill.”

We often do website maintenance that may temporarily interrupt the usage of internal page links. If you are having trouble linking to one of our web pages, you may have to refresh your browser page. Use the “refresh” or “reload” icon on your browser. You can also use the Control R keys on a PC or the Command R keys on a Mac. If you are still having trouble, you may have to clear your browser history, also known as cache. Do an internet search on how to do this on your particular internet browser.

Part Numbers format – inch(metric)
Some part numbers are listed as inch, metric, or both

LATHES

HEADSTOCK ACCESSORIES
  • BLANKS
    • #1 Morse—3055
    • 2.5” x 1-5/16” blank with 3/4-16 thread—3070
    • WW Collet, 1″ blank—2083
  • CHUCKS
    • 3-jaw 2.5″ self-centering—1041(1031), 1070(1068)
    • 3-jaw 3.1” self-centering—1040
    • 4-jaw 2.5″ self-centering—1075
    • 4-jaw 2.5” independent—1044(1035), 1073(1071)
    • 4-jaw 3.1″ self-centering—1076
    • 4-jaw 3.1” independent—1030
  • DRILL CHUCK
    • 5/32″ with #1 Morse Arbor—1010
    • 5/32″ with #0 Morse Arbor—1015
    • 1/4” with #1 Morse Arbor—3072
    • 3/8″ with #1 Morse Arbor—3073
  • COLLETS
    • WW
      • 1″ blank—2083
      • inch—1160 plus last two numbers equal to size in 64ths
      • metric—1178 plus last two number equal to size in 0.1 mm
      • Pot Chuck—2100, 2101, 2102
    • Blank
      • 1″ blank (WW collet)—2083
      • no holes/slits, large head—116000
      • no holes/slits, small head—1160001
    • Deluxe set, boxed
      • inch/metric—1162(1179)
      • metric, 78-piece—(1180)
    • Collet adapter and drawbar—1161(1163)
    • Box only with 96-hole insert—1171
    • Mill
      • inch—3087-3089, 3091, 3095-3097
      • metric—(3090, 3092-3094)
      • special order—3098
      • blank—3099
      • set of three, 1/8″, 3/16″, 1/4″—3060
      • set of three, 3mm, 4mm, 6mm—(3090)
    • Pot Chuck
      • WW—2100, 2101, 2102
      • 10mm—(2103, 2104, 2105)
  • SPACER BLOCK KIT—1291
  • SPINDLE HANDWHEEL—2049
  • SPUR DRIVER—3035
  • TOGGLE SWITCH DUST COVER—3015
CROSSLIDE ACCESSORIES

CNC UPGRADE KIT

    • 4000/4500-series 15” lathes—6720(6725)
    • 4400-series 24” lathes—6730(6735)
  • COMPOUND SLIDE—1270
  • CROSSLIDE ACCESSORY PLATE—3017
  • CUTTING TOOLS
    • 1/4” HSS blank—3005
    • 1/4” HSS set of 3—3007
    • 1/4” Brazed carbide set of 3—3006
    • 3/8” Inserted tip carbide
      • RH—2256
      • LH—2257
      • Set of two—2258
  • CUT-OFF TOOLS
    • Standard holder with blade—3002
    • Rear mounting block for 3002—3016
    • Rear mount holder with blade—3018
    • Quick-change cut-off tool holder—2290
  • KNURLING TOOL HOLDERS—2275, 3004
  • RADIUS-CUTTING ATTACHMENT—2200
  • RISER BLOCKS
    • Compound Slide Riser
      Block—1272
    • Cut-off Tool Riser Block—1296
    • Quick-Change Tool Holder Riser
      Block—2251
    • Spacer Block Kit
      (headstock riser and riser toolpost)—1291
    • Steady Rest Riser Block—1290
    • Tailstock Riser Block—1292
  • THREAD-CUTTING ATTACHMENT—3100
  • TOOL HEIGHT GAGE—3009
  • TOOLPOSTS
    • Standard 1/4”—40180
    • Rocker—3057
    • Riser Rocker—1288
    • Riser 3/8”—1289
    • 3/8”—7600
    • Micro Grinder Toolpost—8976
    • Micro Grinder Riser Toolpost—8987
    • Two-position 1/4” / 1/4”—3003
    • Two-position 3/8″ / 5/16”—3008
    • Two-position 1/4 / 3/8″—7603
    • Quick-change toolpost with 3 tool holders—2250
    • Quick-change Carbide Insert Holder (with insert for 2250)—2295
    • Quick-change Toolpost Riser—2251
  • TOOL RESTS
    • Wood tool rest set, standard height—3038
    • Riser—3047
    • W.R. Smith watchmaker’s T-rest—2110
  • WORK SUPPORT
    • Steady rest—1074
    • Riser block for steady rest—1290
    • Follower rest—1090
  • POWER FEED
    • 120VAC—3001
TAILSTOCK ACCESSORIES
  • ADJUSTABLE TAILSTOCK TOOLHOLDERS
    • Live center—1201
    • Chuck arbor—1202
    • Tool holder—1203
    • 1″ Die holder—1206
  • BULLNOSE LIVE CENTER—1182
  • LIVE CENTER
    • Standard—1191
    • Bullnose—1182
  • LIVE CENTER TO COLLET ADAPTER
    • 8mm—2106
    • 10mm—2107
  • TAILSTOCK JACOBS DRILL CHUCKS
    • 5/32”—1015
    • 1/4”—1072
    • 3/8″—1069
  • TAILSTOCK RISER BLOCK—1292
  • TAILSTOCK SPINDLE EXTENDER—1220
  • #0 MORSE TO 3/4-16 ADAPTER—1230
ACCESSORIES FOR MILLING ON THE LATHE

VERTICAL MILLING COLUMN

    • Standard—3050(3053)
    • Standard with adj. “zero” handwheel—3480(3485)
    • Multi-direction—3580(3585)
  • VERTICAL MILLING TABLE—1185(1184)
OTHER LATHE ACCESSORIES
  • LATHE VINYL DUST COVER
    • 4000 Lathe—4150
    • 4400 Lathe—4151
  • HANDWHEELS
    • Oversize 2.5″—3400(3410)
    • 2” Adj. Zero—3420(3430)
    • 2.5” Adj. Zero—3440(3450)

VERTICAL MILLING MACHINES

HEADSTOCK ACCESSORIES
  • BORING HEAD—3054(3049)
  • BORING TOOLS
    • .6 x 1/4”—3061
    • 1.0 x 5/16”—3063
    • 1.5″ X 5/16″—3064
  • COLLETS
    • Mill-By size—3087 through 3098
    • Set of 3 with drawbolt—3060(3090)
  • DRILL CHUCKS (Jacobs)
    • 5/32″—1010
    • 1/4”—3072
    • 3/8″—3073
  • END MILL HOLDERS
    • 3/16”—6080
    • 1/4”—6079
    • 5/16”—3075
    • 3/8”—3079
    • 6.0mm—(3076)
    • 8.0mm—(3077)
    • 10mm—(3078)
  • END MILL
    • 1/4″ Shank, single-ended
      • 3-flute (3-piece set)—3080
    • 3/8″ Shank, double-ended
      • 2-flute (6-piece set with holder)—7400
      • 4-flute (6-piece set with holder)—7401
  • FLY CUTTERS
    • Standard—3053
    • Single flute Inserted tip carbide—7620
  • GEAR TOOTH CUTTER—3217
  • MILL ARBORS
    • 7/8” Short—3230
    • 7/8” Long—3231
    • 1” Short—3235
    • 1″ Long—3236
  • MORSE #1 BLANK—3055
  • ROTARY COLUMN ATTACHMENT—3500
  • SENSITIVE DRILLING ATTACHMENT—1012
  • SLITTING SAW HOLDER—3065
  • SPACER BLOCK—1297
WORK-HOLDING DEVICES
  • 90° ANGLE PLATE—3559
  • CHUCK-TO-T-SLOT ADAPTER—1187
  • CNC ROTARY INDEXER with controller—8700
  • HOLD-DOWN SETS
    • Standard—3012
    • Step Block—3013
    • 4-Jaw hold-down set—3058
  • MILL TOOLING PLATE—3560
  • MILL VISE
    • Standard—3551
    • Standard + Rotating vise base—3575
  • MILL VISE ROTATING BASE—3570
  • INDEXING ATTACHMENT—3200
  • INDEX BLOCK SET—2045
  • RIGHT ANGLE ATTACHMENT—3701
  • RIGHT ANGLE ADJUSTABLE TAILSTOCK—3702
  • ROTARY TABLE—3700
  • TILTING ANGLE TABLE—3750
PARTIAL MILL COMPONENTS
  • MILL TABLE
    • Extended 18″ (manual or CNC)—54182
  • MILL COLUMN BED
    • Extended 15″, manual—45260
    • Extended 15″, CNC—45261
  • XY BASE
    • Standard 10”—5200(5210)
    • Deluxe 12”—5220(5225)
    • Model 2000 14”—5600(5610)
  • XYZ BASE
    • Standard 10”—5201(5211)
    • Deluxe 12”—5230(5235)
    • 8-direction 14”—5625(5630)
  • MILL COLUMN SPACER BLOCK (2″)—1300
OTHER MILL ACCESSORIES
  • ENGRAVING HEADSTOCK ASSEMBLY—8900
  • HANDWHEELS
    • 2.5″ Oversize—3400(3410)
    • 2″ Adj. Zero—3420(3430)
    • 2.5” Adj. Zero, X and Y axes—3440(3450)
    • 2.5” Adj. Zero with bearings, Z-axis—3460(3465)
  • HORIZONTAL MILLING CONVERSION—6100
    • Adapt existing column to 2-piece—6101
  • MILL VINYL DUST COVER
    • 5000/5400-series mills—5150
    • 2000-series mill—5151
  • PARALLELS, Set—7506
  • UPGRADE
    • Standard Column to 8-way—5650(5660)
    • Mill Saddle Locking Lever—4017U

ACCESSORIES FOR BOTH LATHE AND MILL

  • 10,000 RPM PULLEY SET—4335
  • CENTER DRILL SET—3021
  • CHIP GUARD—4360
  • CUTTING TOOLS (See cutting tools price list)
  • DRIVE BELT—40040 (See replacement parts price list)
  • DIGITAL READOUT
    • 2-axis (lathe)—8200(8260)
    • 3-axis (mill)—8100(8160)
    • 3-axis (lathe plus vertical milling column)—8210(8225)
    • Z-axis DRO handwheel only—8240(8245)
    • 2-axis kit without DRO electronics box—8220(8225)
  • HEX T-DRIVER, 5/32”—3020
  • REPLACEMENT PARTS (See replacement parts price list)
  • SAFETY GLASSES—5330
  • SPINDLE HANDWHEEL—2049
  • STEPPER MOTOR FOR CNC—67130
  • TOGGLE SWITCH DUST COVER—3015
  • T-NUTS—3056

ACCESSORIES FOR CLOCKMAKERS

  • GEAR CUTTING ARBORS
    • 7.0mm to #1 Morse—2094
    • 7.0mm to 10.0mm “D” collet—2095
    • 7.0mm to 8.0mm WW collet—2096
  • W.R. SMITH T-REST—2110
  • 8.0mm COLLET TO 3/4-16 THREAD—2090
  • 8.0mm COLLET TO 3/8-24 THREAD—2092
  • 10mm “D” COLLET TO 3/4-16 THREAD—2091
  • 10mm “D” COLLET TO 3/8-24 THREAD—2093
  • Horological Milling Machine Bushing and Depthing Accessory—2118

BOOKS AND VIDEOS

  • HOME SHOP MACHININST’S HANDBOOK by Doug Briney—5300
  • TABLETOP MACHINING by Joe Martin—5301
  • MACHINE SHOP ESSENTIALS by Frank Marlow—5305
  • MACHINE SHOP KNOW-HOW by Frank Marlow—5307
  • SHERLINE TOOLS AND ACCESSORIES CATALOG—5325
  • SHERLINE INSTRUCTION GUIDE—5326
  • SHERLINE SHOP ACCESSORIES GUIDE—5327
  • STEAM ENGINE VIDEO DVD by Rudy Kouhoupt—5328
  • SHOP SECRETS VIDEO (Measuring tools) DVD by Mike Rehmus—5329
  • SHERLINE LATHE BASICS DVD (Install & operate the Sherline Lathe) by Mike Rehmus—5335